NF WF1973 - Burst Setting and Manipulation; Burst Oscillation Types

4.9 Burst Setting and Manipulation
105
WF1973/WF1974
4.9 Burst Setting and Manipulation
4.9.1 Burst oscillation types
The following four types of burst oscillation can be done.
•Auto burst
Oscillation and stop are automatically repeated with the respectively specified wave
number. No trigger signal is required. ) p. 106
• Trigger burst
Oscillation with the specified wave number is done each time a trigger is received.
) p. 109
• Gate oscillation
Oscillation is done in integer cycles or half cycles while the gate is on. ) p. 113
• Triggered gate oscillation
This is gate oscillation that switches the gate on/off each time a trigger is received.
) p. 118