30 – ENGLISH
PRODUCT MAINTENANCE
10
10 PRODUCT MAINTENANCE
The automation must be subjected to maintenance work on a reg-
ular basis in order to guarantee it lasts.
a
Maintenance must be carried out strictly in com-
pliance with the safety provisions provided in this
manual and in accordance with the laws and regu-
lations in force.
To carry out maintenance on the gearmotor:
1. schedule maintenance interventions within maximum 6
months or after maximum 3.000 manoeuvres from the previ-
ous maintenance intervention
2. disconnect all power supplies, including any back-up bat-
teries
3. check for any deterioration in the materials making up the
automation, with special emphasis on erosion or oxidation of
the structural parts; replace any parts that are not to stand-
ard
4. check the state of wear of moving parts: pinion, rack and all
gate leaf components; replace any worn parts
5. connect the power supplies again and run all the tests and
checks described in the “Testing” paragraph (page 15).
PRODUCT DISPOSAL
11
11 PRODUCT DISPOSAL
l
This product is an integral part of the operator and
must therefore be disposed of with it.
As with the installation, only qualied personnel must dismantle the
product at the end of its life.
This product is composed of different types of materials. Some
of these materials can be recycled; others must be disposed of.
Please enquire about the recycling or disposal systems in place in
your local area for this type of product.
a
WARNING
Some parts of the product may contain polluting or
dangerous substances. If not disposed of correctly,
these substances may have a damaging effect on
the environment and human health.
l
As indicated by the symbol shown
here, this product must not been
disposed of with household
waste. Separate the waste for dis-
posal and recycling, following the
methods stipulated by local reg-
ulations, or return the product to
the seller when purchasing a new
product.
a
WARNING
Local regulations may impose heavy penalties if
this product is not disposed of in compliance with
the law.
To Next Page
Loading...
Need help?
Power
Operating Environment
