Nice Spido Instructions And Warnings For Installation And Use

18 – ENGLISH
7.3 SETTING OF THE MOTOR FORCE
Function found in the FORCE menu.
This function allows for modifying the force and friction sensitivity
that the control unit uses to move the door.
Using the
f
and
h
buttons, select one of the
values present in the underlying table. To conrm it, press the
g
button.
Table 5
MOTOR FORCE SELECTION
Value Description
Minimum force
...
...
...
...
(Default)
Medium force
...
...
...
Maximum force
7.4 SETTING THE MOTOR SPEED
Function found in the SPEED menu.
This function allows for modifying the automation’s opening and
closing speeds.
Using the
f
and
h
buttons, select one of the
values present in the underlying table. To conrm it, press the
g
button.
a
At the end of the operation, the automation will ask
to run the automatic force search procedure, sig-
nalling it with the ashing courtesy light (consult
the “Automatic force search” chapter on page 14).
Table 6
MOTOR SPEED SELECTION
Value Opening speed Closing speed
Speed 40% Speed 40%
Speed 50% Speed 50%
Speed 50% Speed 75%
Speed 50% Speed 100%
Speed 75% Speed 50%
Speed 75% Speed 75%
Speed 75% Speed 100%
Speed 100% Speed 50%
(Default)
Speed 100% Speed 75%
Speed 100% Speed 100%

Nice Spido Specifications