EasyManua.ls Logo

Nicoya OpenSPR-XT - User Manual

Nicoya OpenSPR-XT
82 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
NICOYA LIFESCIENCES
Operation and Service Manual V1.0
Last Updated: April 14, 2016 (V1.0)
support@nicoyalife.com
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation. This device was
manufactured in Canada.
Question and Answer IconNeed help?

Do you have a question about the Nicoya OpenSPR-XT and is the answer not in the manual?

Summary

Safety and Preparation for Use

Line Voltage

Electrical power requirements for the instrument and autosampler.

Line Fuse

Information about the internal, non-user serviceable line fuse.

Operate Only with Covers in Place

Safety warning against operating the instrument with covers removed.

Serviceable Parts

Statement that the instrument contains no user-serviceable parts.

Additional Safety Notes

General safety precautions for handling chemicals and equipment.

Operating Conditions

Recommended conditions for safe and optimal instrument performance.

Specifications

Size and Weight

Physical dimensions and weight of the OpenSPR and XT add-on.

Electrical Specifications

Voltage, frequency, and power requirements for the instrument.

Recommended Software Requirements

System requirements for operating the OpenSPR-XT software.

Operating Specifications

Technical details like flow cell volume, chip material, and pump type.

Chapter 1: Getting Started

Initial Equipment Setup

Steps for setting up the instrument before initial use.

Unpacking of OpenSPR-XT Instrument

Procedure for safely removing the instrument from its packaging.

Setting up Fluidic Connections

Instructions for connecting the fluidic tubing for the system.

Turning on the OpenSPR-XT

Steps to power on the instrument and start the software.

Overview of OpenSPR-XT Instrument Components

Description of the main parts of the OpenSPR and XT autosampler.

Chapter 2: Operation Guidelines

Required Items

List of necessary items for operating the instrument.

Experimental Procedure

General guide for performing experiments with the instrument.

Shut Down Procedure

Steps to properly turn off and prepare the instrument after use.

Chapter 3: Data Analysis using TraceDrawer

Data Output

Description of the files generated after completing a test.

TraceDrawer Analysis

Procedures for analyzing experimental data using TraceDrawer software.

Additional Resources

Links to further documentation and tutorials for TraceDrawer.

Chapter 4: OpenSPR-XT System Details

Hardware

Detailed description of the instrument's physical components.

Software

Overview of the software interface and functionalities.

Chapter 5: FAQ & Troubleshooting

Frequently Asked Questions

Common questions and answers regarding instrument operation.

Troubleshooting

Solutions for common issues encountered with the system.

Chapter 6: Cleaning and Maintenance

Start-up and Diagnostic Routines

Procedures for initial setup and routine performance checks.

Instrument Maintenance and Cleaning

Steps for regular cleaning to ensure optimal performance.

Sensor Chip Cleaning

Methods for cleaning sensor chips to remove contaminants.

Installing a New Flow Cell

Instructions for replacing the instrument's flow cell.

Changing the Sample Loop

Procedure for replacing the sample loop in the autosampler.

Chapter 7: Theory

Localized Surface Plasmon Resonance

Explanation of the LSPR principle behind the sensor technology.

Binding Kinetics

Concepts and principles of biomolecular binding kinetics.

References

Citations and sources used in the manual.

Nicoya OpenSPR-XT Specifications

General IconGeneral
TypeSurface Plasmon Resonance (SPR) Instrument
ConnectivityUSB
SoftwareTraceDrawer
DetectionLabel-free
Data Analysis SoftwareTraceDrawer

Related product manuals