camera’s memory card. Once they are there, the camera
can see and install them.
3. Referring to Figure 3-34, image 1 (which continues from
Figure 3-31), select Copy to camera from the Load/save
menu and scroll to the right.
4. If you’ve installed both controls onto the memory card,
you’ll see PORTRAIT and LANDSCAPE showing in
the Copy to camera menu (see Figure 3-34, image 2).
5. Press the OK button and the camera will present you
with four special slots evidently made for future Nikon
Picture Controls—not your own Custom Picture
Controls, which have their own C1-C9 memory locations
in the camera, as shown
in Figure 3-32, image 3. (If you scroll to the right instead
of pressing the OK button, you will be able to examine
and adjust the optional Picture Control’s settings before
saving it to your camera. If you don’t want to modify it,
simply press the OK button.)
6. The Save as menu will now appear. Select one of the
four Unused slots and press the OK button. The optional
PT or LS Picture Control will be entered there and will
also be added to the Shooting Menu > Set Picture
Control list for future use.
Delete from Card
Once you’ve finished loading Custom Picture Controls or
optional Nikon Picture Controls to your camera, you may be
ready to delete a control or two from the memory card. You
186
To Next Page
Loading...
