Enter the time at which you want the intervals to begin.
If I wanted to start at 3:30 p.m., I would insert the
following:
▪ 15:30
Once you’ve entered the time, scroll to the right.
3. You will now see the Interval screen with hours :
minutes’ seconds″; in the following format (see
Figure 3-61, image 4):
▪ 00 : 00′ 00″
The first two zeros represent the hour, the second set
represents minutes, and the third set seconds. Since we
want to start out with an Interval of 10 seconds, let’s set
the screen to look like this:
▪ 00 : 00′ 10″
Scroll to the right to get to the next screen.
4. Now we’ll select the number of intervals (see
Figure 3-61, image 5). This screen will say Select intvls
X no. of shots in the format below. Number of intervals
× number of shots = total shots.
▪ 000 × 0 = 0000
Set your camera so that it looks like this instead (see
Figure 3-61, image 5):
▪ 003 × 2 = 0006
This means that there will be 003 intervals of 10 seconds
each (set in step 3 above) and that the camera will take 2
pictures in each interval, for a total of 0006 pictures. In
239
To Next Page
Loading...
