Nikon D300 - Page 488

Artist name and Copyright information into the metadata of
the image (see Figure 5-29).
1. Select Copyright information from the Setup Menu and
scroll to the right. You’ll see the Copyright information
screen with Done highlighted (see Figure 5-29, images 1
and 2).
2. Scroll down to Artist and scroll to the right (Figure 5-29,
image 3).
3. You’ll now see the Artist screen with all the available
characters (Figure 5-29, image 4). Add your name here,
with a maximum of 36 characters. Use the Multi Selector
to scroll around within the characters. Lowercase
characters are found by scrolling down. Select a
character by pressing the Multi selector center button in
the D300S or the center of the Multi Selector in the
D300. You correct errors within the text you’ve already
entered by holding down the Thumbnail/playback zoom
out button and scrolling left or right with the Multi
Selector. Remove a character already in the name area
by scrolling to it and pressing the Delete button (garbage
can). Press the OK button when you have entered your
name. Refer to the Camera Body Reference section at
the beginning of this book to find button locations for
your specific camera.
4. Now scroll down to the Copyright line on the Copyright
information screen, and then scroll to the right
(Figure 5-29, image 5).
5. Add your name here using the same controls as
described in step # 3 (Figure 5-29, image 6).
488