Figure 5-39. AF Fine tune, first two screens
Following are the screens and steps to configure AF fine tune
for lenses you own, if needed (see Figure 5-39 through
Figure 5-43). There are four selections on the AF fine tune
menu:
▪ AF fine tune (On/Off)
▪ Saved value
▪ Default
▪ List saved values
Each of the following FIGs continues where Figure 5-39 left
off. Figure 5-40 shows the first two configuration screens in
the AF fine tune series.
Each of the four selections listed has its own screen for
configuration.
We’ll carefully examine each of them, and discuss what it
does and how to configure it.
513
To Next Page
