Playback retouching. To use the Retouch Menu options,
you’ll follow four basic steps (see Figure 6-2):
1. Press the Playback button and choose a picture by
displaying it on the Monitor (see Figure 6-2, images 1
and 2). You’ll now have a picture ready for retouching. I
chose a picture of my parents in Figure 6-2, image 2.
2. Press the OK button to open an abbreviated Retouch
Menu (see Figure 6-2, image 3).
3. Select one of the Playback Retouch Menu items and
make any adjustments required (see Figure 6-2, image
4).
4. Press the OK button to create the retouched copy.
Some of the Retouch Menu options are not available under
the Playback Retouch Menu. That’s why I used the full
Retouch Menu for this chapter. Remember that Playback
retouching is available by simply pressing the OK button
when an image is showing on the Monitor.
The following direct methods require that you select a
Retouch Menu function, and then select an image upon which
to apply the effect the function provides. Let’s consider each
section of the Retouch Menu in detail.
532
To Next Page
Loading...
