card, you can skip the source card selection step. Refer to
Figure 2-15 (or the camera’s actual menu) and follow these
steps to select a source card:
1. Select Copy image(s) from the Playback Menu.
2. Choose Select source from the Copy image(s) menu.
3. Choose one of the card slots. I use the SD card as my
primary card, so Figure 2-15 shows that I selected the
SD card slot as the source. Note: You can use the
Shooting Menu > Primary slot selection function to
choose which card is the primary for your camera—SD
or CF.
4. Press the OK button to lock in your choice.
Once you’ve chosen a source, it’s time to select images to
copy. It’s a somewhat complex process to describe but fairly
easy to use. The image selection choices were a little
confusing to me at first. I was expecting a selection saying
something like, “Select images to copy”. However, you are
only given these three options:
▪ Deselect all
▪ Select all images
▪ Select protected images
What if you want to copy only one image, or five? All three
ways listed allow you to choose images for copying, even
though it seems a little counter-intuitive at first.
62
To Next Page
Loading...
