5. Scroll down to Copy d-0 and press the OK button. The
camera will then write a copy of d-0 into the memory
location you selected (see Figure 10-7, image 3).
Once you’ve written a WB value to one of the memory
locations d-1-d-4, it will remain there for future use as
needed. You can access any of the saved WB values by
selecting PRE with the WB button and then rotating the
Sub-command dial until you find the one you want (d-0-d-4).
Or you can use the menus to directly select the named
memory location.
689
To Next Page
Loading...
