47
s
3 Choose single-point AF.
Rotate the AF-area mode
selector until it clicks into place
pointing to K (single-point
AF).
At this setting, the user
can choose the focus point.
4 Choose single-servo
autofocus.
Rotate the focus-mode selector
until it clicks into place
pointing to S (single-servo
autofocus).
At this setting, the
camera will automatically focus
on the subject in the selected
focus point when the shutter-release button is pressed
halfway.
Pictures can only be taken when the camera is in
focus.
AF-area mode
selector
Focus point
Focus-mode
selector
To Next Page
Loading...
