www.nitronic.ch - 45 -
Nitronic AG
Mattenstrasse 11
CH – 2555 Bruegg Tel. +41 32 373 7070
Switzerland Fax +41 32 373 70
Lubrication Schedule
In the interest of a smooth and reliable functioning of the ST730 over longer period of time, it is of
the essence that the lubrication intervals are being observed.
Every 2 months:
Use a lint-free rag to clean the spindle and apply over its entire length a thin coat of KLÜBER
ISOFLEX LDS 18 SPEZ.A grease (Fig. 41).
Fig. 41. Points of lubrication
To Next Page
Loading...