www.nitronic.ch - 51 -
Nitronic AG
Mattenstrasse 11
CH – 2555 Bruegg Tel. +41 32 373 7070
Switzerland Fax +41 32 373 70
Technical data
Stripping length up to max. 30mm
Stripping diameter up to max. 7mm
Stripping capacity appr. 300 to 520 pcs/h (3-steps)
Machine cycle 3-steps = 5 - 7 seconds, depends on auxiliary functions
Noise level appr. 62 dB (A)
Stripping blades Carbide steel
Settings Length: 0.1 mm steps
Diameter: 0.001 mm steps
Stripping steps Max. 9 steps in one stripping cycle
Program capacity 999 different wires with 9 stripping steps each
Input voltage Selectable 100V, 115V, 230V +/- 10% 50-60 Hz.
Power consumption appr. 80 VA
Net weight 9.5 kg
Dimensions Length x Width x Height / 43.5 x 17.0 x 18.5 cm
To Next Page
Loading...