www.nitronic.ch - 7 -
Nitronic AG
Mattenstrasse 11
CH – 2555 Bruegg Tel. +41 32 373 7070
Switzerland Fax +41 32 373 70
Touchscreen, Connections
Touchscreen
Cable
Recalling data of an already programmed cable.
Step
Select individual processing steps.
Length
Programming of the current strip length.
ParStrip
Activating and setting of the partial strip.
Diameter
Programming of the respective diameters.
Waybck
Activating and setting of the wayback function.
Feed
Programming the blade feed rate
RTime
Programming the rotating time.
Rot
Activating the rotation during pull-off.
↑
↑↑
↑
↓
↓↓
↓
Scrolling in step.
To Next Page
Loading...