Nokia 7368 ISAM ONT G-240W-C - Page 76

Configure a G-240W-C indoor ONT
76
7368 ISAM ONT G-240W-C Product Guide
3FE-46256-AAAA-TCZZA Issue: 01
Procedure 9 WAN status retrieval
1 Select Status > WAN Status from the top-level menu in the GPON Home Gateway window,
as shown in Figure 22.
Figure 22 WAN status window
Table 19 describes the fields in the WAN status window.
Table 19 WAN status parameters
Field Description
WAN connection list Drop-down menu listing all WAN connections. The connection shown is the
connection for which WAN status will be shown.
Connection Mode Connection mode of the WAN connection
Enable/Disable Select this checkbox to enable the WAN connection
VLAN VLAN ID
WAN Link Status Whether the WAN link is up or down
PPPoE Concentrator Displays the PPPoE Access Concentrator (AC) name
This field applies only if the Connection Mode is set to PPPoE
BRAS Connection Status Whether the BRAS connection is connecting or disconnected
Authentication Failure Reason for authentication failure: account disabled, account expired, password
expired, authentication failure
ISP Failure Reason for ISP failure: disconnect, time out, server out of resources
PPPoE Connection Failure Displays USER DISCONNECT when connection failure is due to user
disconnect rather than ISP failure
PON Link Status Whether the PON link is up or down
(1 of 2)
Release 06.01.00 | March 2019 | Edition 12