Nokia IP560 - Page 127

Replacing or Upgrading Memory
IP560 Security Platform Installation Guide 127
3. Loosen the two front panel retaining screws.
4. Slide the chassis tray assembly forward, pressing the release tab on the
right side of the assembly, and completely remove the chassis to expose
the motherboard components.
5. Remove the DIMM by pressing the two retaining clips outward and
carefully pulling each DIMM upward.
00354
SLOT 1 SLOT 2 SLOT 3 SLOT 4
1
2
3
4
IP560
Chassis tray assembly retaining
screws
SLOT 1
SLOT 2
SLOT 3
SLOT 4
1
2
3

4
IP560
00520