8 Replacing Other Components
128 IP560 Security Platform Installation Guide
You might need to pull opposite ends of the DIMM alternately to
gradually free it from the contact pins.
6. Press the new DIMM into the socket until it clicks into place.
The top of the DIMM is smooth. The bottom edge has two different-
length sets of contacts, which mate with the slots on the socket. Be sure
the contacts and slots are properly aligned before you insert the DIMM.
SLOT 1
SLOT 2
SLOT 3
SLOT 4
1
2
3
4
IP560
00469
To Next Page
Loading...
