Nokia RM-596 - Introduction; Phone Description; Key Components

Introduction
Phone description
RAPUYAMA is the main digital baseband ASIC in the phone. It contains functionality for both WCDMA and GSM
EDGE. The hardware accelerator is used for imaging and video.
GAZOO/PEARL (N2200) is the main audio and energy management controller for the phone.
Key components
Function Description Item ref
Main PWB 3CE
Upper flex module
UI flex module
Flash flex module
Baseband ASIC EM ASIC GAZOO/PEARL N2200
RF ASIC ÄLLI N7512
Processor RAPUYAMA D2800
GSM/WCDMA PA UKKO
GSM850/900/1800/1900
WCDMA I, II, IV, V and VIII
N7510
Oscillators VCTCXO
TCXO 16.368 MHZ
Crystal 32.768KHZ
Crystal 38.4 MHZ
Crystal 19.2 MHZ
G7500
G6200
B2200
B7500
B1400
CMT memory Combo POP4 2G DDR + 4G M3 NAND (stacked with RAPU) D3000
Back-up capacitor RTC back-up capacitor G2200
WLAN/ Bluetooth/ FM
radio/ FM transmitter
BOB 1.0M-b module N6300
GPS GPSCost4.1 N6200
Battery BL-4D
Battery connector Tabby blade interface X2070
UI flex connector Board-to board connector for UI flex module X2500
Display connector Board-to-board connector X1600
RF connectors X6701
X7500
X7501
USB transceiver D3300
MicroSD connector X3200
RM-596
System Module
Issue 2 COMPANY CONFIDENTIAL Page 6 – 5
Copyright © 2010 Nokia. All rights reserved.