Nordson iControl - Program and User Data Cards

Installation
3-22
Part 1105779-04
E 2014 Nordson Corporation
2
1
Nordson
2
1
2
1
2
1
2
1
2
1
2
1
2
1
2
3
4
567
8
9
10
11
12
13
1416
Gun Air
Flow−Rate Air
Atomizing Air
Gun
Pneumatic
Connections
1
Nozzle
Purge
Ouputs
(Optional)
1
2
15
Figure 3-13 Console Rear Panel (Cover Removed)
Program and User Data Cards
The iControl program and user configuration and preset data are stored on
two 128 Mb CompactFlash cards. These cards function as removable hard
drives. The iControl consoles are shipped with these cards installed.
CAUTION: The Compact Flash cards CANNOT be hot-swapped. Shut
down the iControl program and operating system, then turn off the iControl
console before removing the cards. Removing the cards while power is on
could corrupt the data on the cards and damage the cards.
CAUTION: Never turn off console power without first shutting down the
iControl program and operating system. Doing so could corrupt the system
software. Refer to Program Shutdown in the iControl Operator Interface
manual for the shutdown procedure.