Troubleshooting
6-13
Part 1124631_01
E 2015 Nordson Corporation
Term Definition Corrective Action
Active/Inactive
S A Fault/Alert that has been
clearedissaidtobeInactive.
S A Fault/Alert that is still present
or has not been retested is said
to be Active. Active Faults and
Alerts will appear first in the
message log, sorted by time of
occurrence.
S Inactive Faults and Alerts
appear after Active ones, also
sorted by time of occurrence.
S The Message Log contains a
maximum of 25 messages and
older messages are pushed out
of the log as new ones enter.
A factory reset clears all the settings
and recipes.
The No Faults or Alerts message is
displayed after Factory Reset until the
first Alert or Fault occurs.
To Next Page
Loading...
