Troubleshooting
6-17
Part 1124631_01
E 2015 Nordson Corporation
Touch Screen Issues
Problem Power Supply Board Corrective Action
Touch Screen Fails to Start Up
a
Note the following components:
a. DS14
Firstmakesurethat24VDC
is being supplied to the
Controller Board by verifying
that DS14 is lit. If not, refer to
Controller Board Fails to Start
Up given earlier.
Remove Touch Screen
a
b
1 Remove the two touch screen
retaining screws and
disconnect the flex cable from
theControllerBoard.
a. Two touch screen screws.
Seetheimagebelowin
Remove Touch Screen.
b. Flex cable
Continued...