Nordson Spectra 30 - Access the Prism Utility

Using the Prism Utility
B-2
Part 1124631_01
E 2015 Nordson Corporation
Save the .NOR File (contd)
Menus Action
Backup to USB
Spectra 30
7
6
Spectra 30_Backup_2014428_1912.nor
Spectra 30_Backup_2014428_19 12.nor
6 The progress bar screen appears
to indicate that the files are being
copied into the USB device.
7Tap
 to close the dialog box.
8 Insert the USB device into your
PC.
9 GotothePrism utility.
10 Select Open .NOR file and go to
your USB drive location.
11 Go to the folder called Backup,
then select and o pen the .NOR
backup file.
12 Select OK in the consecutive
messages that appear.
NOTE: To view the settings that
have been recently backed up NOR
file on the PC, go to Unit Information
1 and Unit Information 2 tabs.
Access the Prism Utility
1. Go to http://emanuals.nordson.com/adhesives/software/.
2. Click on Spectra 30 from the list.
3. Follow the instructions on the web page to download and install the
Prism utility.
4. Navigate to the downloaded file, Spectra30_Prism.zip.Openthezip
file, select Spectra30_Prism.msi and run it.
5. In the Prism menu you can make changes using options in the following
screens:
S Custom Settings tab, see Figure B-1
S Alert-Fault Masking 1 tab, see Figure B-2
S Alert-Fault Masking 2 tab, see Figure B-3
NOTE: Unit Information 1 and Unit Information 2 tabs display the user
selected settings and are for reference only.