Nordson Spectra 30 - Whats Being Saved in a Recipe File; Recipe Mismatches

Using the Menus
5-13
Part 1124631_01
E 2015 Nordson Corporation
What's Being Saved in a Recipe File
This is a list of functionalities that are saved under recipes:
S Pattern configurations
S Applicator settings
S Bead length
S Trigger settings
S Triggertoapplicatorassignment
S Pressure se ttings
NOTE: When Recipe settings are changed under Manage Recipe, the Recipes
Folder icon displays
:
. Refer to Recipe Changes givenearlierinthissection
for more details.
Recipe Mismatches
A recipe mismatch occurs when a recipe requires components that are not in
the current machine configuration. This will result in defective adhesive
application. A recipe mismatch can be caused by:
S Removal of the encoder
S Removal of an applicator
S Removal of trigger
Mismatch conditions are indicated by an icon on the recipe in the recipe
selector.
1
2
3
Figure 5-11 Recipes mismatch buttons
1. Mismatch length 2. Mismatch trigger 3. Mismatch applicator