TheUserInterface
4-12
Part 1124631_01
E 2015 Nordson Corporation
Using the Home Screen
The pattern controller is shipped from the factory with most software settings
pre-configured and ready to use. However, there are some settings that you
must configure and fine tune to best fit your manufacturing process.
Use the Home Screen components to view and re-configure the pattern
controller settings.
1
3
5
2
4
9
6
7
8
Figure 4-6 Home Screen
1. Main Menu button
2. Password lock
3. Recipe
4. Message log/Diagnostics status
5. Adhesive button
6. Trigger button
7. Enabled applicator button
8. Disabled applicator button
9. Pattern overview
To Next Page
Loading...
