Specifications
7-1
Part 1124631_01
E 2015 Nordson Corporation
Section 7
Specifications
System Specifications
Item Specification
Maximum operational line spee d
Time Based Pattern Controller
ONLY:
Not available
Distance and Time Based
Pattern Controller
300 m/min
Input voltage 100 - 240 VAC, 1.6 Amp maximum,
1 Phase, 50/60 Hz
Internal power supply Built-in 24 VDC
Units of measure Inches or millimeters
Encoder
Distance and Time Based Pattern Controller
Item Specification
Encoder inputs Single-ended NPN single-phase
and diffe rential quadrature
encoders supported
Encoder scaling Yes
Encoder power supply output 24 VDC, 250 mA maximum
NOTE: Encoder operation is optional.
To Next Page
Loading...
