Using the Menus
5-14
Part 1124631_01
E 2015 Nordson Corporation
Recipe Mismatches (contd)
Mismatch Button Description
(Item 1 in
Figure 5-11)
This button appears when an encoder (different
machine mode) has been removed and/or added.
(Item 2 in
Figure 5-11)
This button appears when an applicator that is
required by a recipe has been removed.
(Item 3 in
Figure 5-11)
This button appears when a trigger that is required
by a recipe has been removed.
For Fixing Recipe Mismatch Problems refer to Troubleshooting.
Remote Recipe Selection
Recipe selection can be controlled from the PLC rather than within the
controller system.
If it is not included in your system you will need a software license for remote
control capability. If no license for remote inputs, the check box is grayed out
(not selectable). For software license part numbers refer to Parts, Section 8.
For instructions on obtaining and adding software licenses refer to Using
Add-on Software Licenses in Appendix A.
To Next Page
Loading...
