Upgrading to Latest Software
C-1
Part 1124631_01
E 2015 Nordson Corporation
Appendix C
Upgrading to Latest Software
Upgrade to Latest Software
The following instructions pertain to upgrading to the latest software
available.
1. Insert the USB memory device in your PC.
2. Go to http://emanuals.nordson.com/adhesives/software/.Thelatest
version is always available in this location.
SeeFigureC-1.
3. Click on Spectra 30 from the list of products.
4. Select Spectra 30 Control System Software Version X.XXX.
To Next Page
Loading...
