TheUserInterface
4-24
Part 1124631_01
E 2015 Nordson Corporation
Random Length Pattern
This pattern type provides a way to mix products of differing length on the
production line during the same production run. When alternating between
short and long products on the production line, the system is programmed to
automatically determine the length of each product as it passes the trigger,
and it then adjusts the bead size to fit the product.
1
2
4
3
5
6
8
7
9
10
Figure 4-18 Components for setting random bead patterns
1. Current applicator channel
2. Pattern display
3. Leading edge margin
4. Leading edge margin increment
tool
5. Leading edge margin value
6. Trailing edge margin value
7. Trailing edge margin value
increment tool
8. Product length
9. Trailing edge margin
10. Bead
To Next Page
Loading...
