Specifications
7-4
Part 1124631_01
E 2015 Nordson Corporation
Applicators
Item Specification
Applicator outputs Two terminal block per channel.
24 VDC, 1 Amp maximum per
channel
Compensation Auto set based on applicator type
selection (manual adjust)
External power supply Yes. Using an external 24 VDC
supply the applicator output can be
increased to 2.0 Amp per channel
up to a total of 6 Amps.
Triggers
Item Specification
Independent triggers Four
Product queuing Ten
False trigger block Yes
Stuck photocell detection Yes
Signals accepte d NPN or PNP.
24 VDC line driver with jumper
setting change, 3 mA current draw
maximum
Trigger power supply output 24 VDC, 250 mA maximum per
trigger
Pressure Run-up
Item Specification
Run-up Outputs Two
Number of points on curve Two
Output type 4-20mAand0-10V
Run-up loads 4-20mA: 600 Ohms
0-10V: 1000 Ohms
Run-up power supply output 24 VDC, 250 mA maximum
To Next Page
Loading...
