Using the Prism Utility
B-4
Part 1124631_01
E 2015 Nordson Corporation
Access the Prism Utility (contd)
Figure B-3 Settings available in Alarm-Fault Masking 2 tab
6. After making your selections, navigate to File. Select Create PAT file.
The file is restored to your default Documents folder. Note the file name
shownonthescreen:
File name format: Spectra30_1_yyyy-mm-dd_hhmm.pat
7. Insert a USB memory device in your computer.
8. Copy the .PAT file from your Documents folder to the USB memory
device. For instructions on how to restore the file in the pattern controller
refer to Restoring the .PAT File given next.
To Next Page
Loading...
