TheUserInterface
4-4
Part 1124631_01
E 2015 Nordson Corporation
Setup Wizard (contd)
Button Menu Screens Function
Input Setupsysteminputsfor:
S Remote recipe selection
S Remote system idle
NOTE: Set remote idle to
active high (24 VDC) or
active low (0 VDC).
For more information refer to
Input in System Setup in Using
the Menus, Section 5.
Output Setupsystemoutputsfor:
S Active high (24 VDC)
S Active low (0 VDC)
NOTE: The fault/machine stop
setting is typically set for active
low to provide fail safe operation
(power off or loose wire condition
is faulted).
For more information refer to
Output in System Setup in Using
the Menus, Section 5.
Machine S ettings Select from the following options:
S Individual or multiple recipe
files
S Select adhesive output On or
Off when power is turned on
S Line speed value when
adhesive output starts and
stops (encoder only)
For more information refer to
Machine Settings in System
Setup in Using the Menus,
Section 5.
Continued...
To Next Page
Loading...
