TheUserInterface
4-10
Part 1124631_01
E 2015 Nordson Corporation
Status Bar Components (contd)
See Figure 4-5 for the location of the Status Bar components.
Item Component Button/Indicator
State
System Status
2
Multi Use Area displays one of the following components:
Line Status
100m/min Line Speed
100/min Product Rate
100 Product Count
Applicator
number
Navigates to the next applicator available
Trigger Navigates to the next trigger available
3 Screen Lock
/
Settings locked or unlocked
NOTE: No icon is displayed when Screen Lock is
not enabled.
4
Recipe Status
16
Displays recipe number
Recipes Folder Active recipe has no unsaved changes
Not shown in
Figure 4-5.
Active recipe has unsaved changes
Recipes under remote control
5 Diagnostic
Status
Pattern Controller is ready/okay
Pattern Controller is in an alert condition
Pattern Controller is in a fault condition
Pattern Controller is offline
6 Adhesive Status
Adhesive is on
Adhesive idle due to remote condition
Adhesive idle due to low line speed
Adhesive is off
Continued...
To Next Page
Loading...
