TheUserInterface
4-18
Part 1124631_01
E 2015 Nordson Corporation
Normal Pattern (contd)
NOTES:
S Pattern display (item 5 in Figure 4-9) updates automatically as pattern are
modified.
S Select beads by tapping the beads or using the bead selector arrows
(item 14 in Figure 4-9).
S Adjust delay or length values using the incremental tools (items 7 and 12
in Figure 4-9), or tapping the bead delay and bead l ength numeric e ntry
keypads(items8and11inFigure4-9).
S Select a different applicator channel by tapping the applicator icon
(item 4 in Figure 4-9).
S View product length (item 13 in Figure 4-9) as measured by the assigned
trigger input in real-time.
Normal Pattern Swipe Operation
The number of dots on the swipe tool indicates the number of panels
available. T wo panels are available for pattern edits when Normal pattern is
selected.
Access additional pattern setting functionality by swiping firmly left or right on
the dotted area on the screens shown below.
3
1
2
Figure 4-10 Normal pattern screens
1. Insert selected bead before 2. Delete selected bead 3. Insert selected bead after
To Next Page
Loading...
