Ordering information
6-43
User Guide Rel 1.0 Standard May 1999
Table 6-17 lists the optional fiber manager kits for the AN2016 Cabinet.
Table 6-17
Optional fiber manager kits
CPC PEC Description Quantity
NTNR34AA includes Siecor CMIC fiber manager kit (see Notes) 1
Note 1:
The SC A0768567 will be supplied if the customer does not select a connector from the list
of the three types available listed below.
Note 2:
Six fiber pigtails and connector panels are provided with the kit once the selection is made.
Note 3:
The customer must provide at least 15 feet of fiber with the protective conduit raceway to reach
the connection inside the cabinet to the AN ABM # 1 from the pad mounting template
Note 4:
The NTNR36AA kit must be discarded since only one or the other can be provided.
A0768555 A0768555 Fiber cabinet interconnect center, 24 fibers 1
A0351643 NPS51068-01L01 Fiber optic splice tray organizer 1
Type ST connector: A0768569 (see Note 1)
Type FC connector: A0768568 (see Note 1)
Type SC connector: A0768567 (see Note 1)
NTNR36AA includes Reltec COFO fiber manager kit (see Notes) 1
Note 1:
Four panels of six ST connectors are provided with the kit once the selection is made.
Note 2:
The customer must provide at least 15 feet of fiber with the protective conduit raceway to reach
the connection inside the cabinet to the AN ABM # 1 from the pad mounting template.
Note 3:
The NTNR34AA kit must be discarded since only one or the other can be provided.
A0782851 A0782851 Fiber cabinet interconnect center, 24 fibers 1
A0781535 A0781535 Adapter panel 6 ST connectors 4
A0784352 A0784352 115 feet, ST pigtail non armored 24 fibers, provided
with connectors at one end
1
To Next Page
Loading...
