1-82
Installation 15088:J 10/22/99
XPC-8 Control Module (Power-limited)
Provides eight Class B or four Class A notification appliance circuits. For audio evacuation applications, the XPC-8
can drive eight speaker circuits Style Y (Class B) or four Style Z (Class A), or can be alternately configured to drive
fireman's telephone circuits.
XPM-8/XPM-8L Monitor Module (Power-limited)
Provides eight Style B (Class B) or four Style D (Class A) initiating device circuits. Supports conventional two
wire smoke detectors and normally-open contact devices such as pull stations, waterflow and supervisory
switches, and 4-wire smoke detectors; XPM-8L supports contact devices and Style B wiring only.
XPR-8 Relay Module (May be power-limited or nonpower-limited depending on relay connection)
Provides eight form-C relays. The XPR-8 may be configured to provide four dual form-C relays for use in dual
channel audio selection applications.
For more information, refer to XP Series Transponder System Manual.
www.PDF-Zoo.com
To Next Page
Loading...
