Maintaining and Servicing the NVIDIA DGX Station
DGX Station DU-08255-001 _v4.6|54
4. Slide the drive tray upwards to completely remove it from the unit.
5. If you are replacing an SSD, remove the failed SSD from the drive tray.
a). Using a Phillips screwdriver, remove the four screws attaching the SSD to the drive
tray.
Save the screws for the replacement SSD.
b). Slide the SSD out of the drive tray.
6. Slide the new or replacement SSD into the drive tray.
Make sure that the connector is on the open edge side of the tray.