NXP Semiconductors PN7462AU - Page 116

NXP Semiconductors
UM10883
PN7462 family Quick Start Guide - Development Kit
UM10883
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2018. All rights reserved.
User manual
COMPANY PUBLIC
Rev. 1.6 — 14 May 2018
319816
116 of 120
Fig 76. Starting flash tool in MCUXpresso .................. 73
Fig 77. Build output - flash binary file .......................... 74
Fig 78. Program flash report ....................................... 74
Fig 79. PN7462AU as USB mass storage device ....... 75
Fig 80. PN7462AU IC detected as USB mass storage
device for flash/ EEPROM upgrade ................ 75
Fig 81. LEDs status ..................................................... 77
Fig 82. HW setup for the main example ...................... 79
Fig 83. phExMain standby flow ................................... 81
Fig 84. phExMain non standby flow ............................ 82
Fig 85. PN7462AU phExMain sequence diagram for
standby scenario with RTOS ........................... 87
Fig 86. PN7462AU phExMain sequence diagram for
non-standby scenario with RTOS ................... 88
Fig 87. HW Setup for the “phExEMVCo”example ....... 89
Fig 88. HW setup for the “phExRF”example ............... 91
Fig 89. phExRF Example Application Flow ................. 92
Fig 90. HW setup for the “phExCT”example ............... 93
Fig 91. phExCT Example Application Flow ................. 95
Fig 92. HIF demo architecture .................................... 99
Fig 93. PNEV7462C IRQ pin .................................... 100
Fig 94. POS use case demo architecture ................. 103
Fig 95. POS demo architecture ................................. 104
Fig 96. PC USB reader example block diagram ....... 105
Fig 97. Example architecture .................................... 105
Fig 98. Door access example ................................... 108
Fig 99. Door Access Example - Export Controlled
Version .......................................................... 109