PN7462 family Quick Start Guide - Development Kit
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2018. All rights reserved.
User manual
COMPANY PUBLIC
Rev. 1.6 — 14 May 2018
319816
Fig 64. Building a project
As a part of the build process, the binary file for flash in AXF format is created. This
binary file can be used to update PN7462AU flash via USB mass storage interface or by
using flash tool or debug in MCUXpresso IDE. In case that “Binaries” folder is not visible
in the project structure, refresh the project (right click on project and select “Refresh”).
Fig 65. Build output - flash binary file
To Next Page
Loading...
