E
19
Using an AC Power Adapter
You can also power your camera by using an AC power adapter. The AC power adapter is recommended for
long periods of continuous use or for transferring images to your computer.
1. Make sure your camera is off.
2. Open the port cover and connect one end of the AC power adapter to the
jack labeled “DC IN”.
3. Connect the other end to an electrical outlet.
Make sure you only use the AC power adapter specified for the camera. Damage caused by the use of an
incorrect adapter is not covered under the warranty.
To prevent unexpected auto power off resulting from no battery power during the process of transferring
your images to the computer, use the AC power adapter as a power supply.
The AC power adapter can only be used to power the camera. Batteries cannot be charged inside the
camera.
To Next Page
Loading...
Need help?
General
