E
54
Erasing
Deleting Single Images/Video Clips
You can erase a captured image or a recorded video clip individually by pressing the [ ] delete button.
1. Power on your camera.
2. Press the [ ] playback button.
The last image frame appears on the LCD monitor.
3. View and select unwanted photographed images by using the / buttons,
then press the [ ] delete button.
4. Continue deleting if necessary
If all images are erased, [ NO IMAGE] will pop up.
To exit deleting, press again the [ ] playback button or rotate the mode dial.
Please note that deleted images cannot be recovered. Exercise adequate caution before deleting a picture.
Protected images cannot be deleted with the erase function.
To Next Page
Loading...
