E
29
Using the Flash
The flash is designed to function automatically when lighting conditions warrant its use. You can take an image
using a flash mode that most suits your circumstances.
1. Rotate the mode dial to your desired scene (Auto/Program/Scene/Tv/Av/
Manual) and power on your camera.
2. Press the [ ] flash button located on the back of the camera repeatedly
until your desired flash mode appears on the LCD monitor.
When you toggle the [ ] flash button, the following are displayed in the
shown order:
[ ] Automatic flash [ ] Red-eye reduction [ ] Fill flash (on) [ ] Flash off
3. Compose your image and press the shutter button.
To Next Page
Loading...
Need help?
General
