E
20
Installing an SD Memory Card
Your camera comes with 14MB of internal memory, allowing you to store
images and video clips in the camera. However, you can also expand the
memory capacity by using the SD memory card. An optional SD memory
card provides removable, reusable storage for images and video clips.
1. Make sure your camera is off.
2. Slide open the SD card/battery cover lock.
3. Insert the SD memory card.
If the card cannot be inserted, check its orientation.
4. Close the SD card/battery cover lock firmly.
To remove an SD memory card
1. Make sure your camera is off.
2. Slide open the SD card/battery cover lock.
3. Press lightly on the edge of the memory card and it will eject.
Memory cards may become hot during use; observe due caution when removing memory cards.
To prevent valuable data from being accidentally erased from an SD memory card you can slide the
write protect tab (on the side of the SD memory card) to “LOCK”.
To save, edit, or erase data on an SD memory card, you must unlock the card.
To fully capture all the images you want, reformat your SD memory card first.
Be sure to format your SD memory card on this camera before using it.
Not all SD memory cards are compatible with this camera. We highly recommend using Panasonic,
Toshiba and SanDisk memory cards to ensure good camera performance.
To Next Page
Loading...
Need help?
General
