E
37
Scene Mode – Pan [ ]
Using the [ ] Pan mode fixes the focus so images can be taken quickly when the shutter button is pressed.
Use Pan mode when you do not want to miss a shot, but you cannot predetermine the subject’s position or the
exact focal distance. The focal length is preset to the maximum wide angle setting.
1. Rotate the mode dial to [ SCENE ] Scene mode and power on your camera.
2. Scene modes will display on the LCD monitor. Select [ ] Pan mode by
pressing the button.
3. Press the [ ] menu button.
4. You can change the settings by using the / buttons and then pressing
the button to enter the sub-menu. Select the desired setting by using the
/ buttons, and press the button. To exit the menu, press the [ ]
menu button again.
The provided capture menus are [IMAGE SIZE], [IMAGE QUALITY], [COLOR], [SATURATION],
[SHARPNESS], [FOCUS], [QUICK VIEW], [HISTOGRAM], [CAPTURE MODE], [METERING], [SELF TIMER]
and [INTERVAL].
5. Point the camera at your subject.
6. Press the shutter button.
In [ ] Pan mode, [EV], [WHITE BALANCE] and [ISO] cannot be set.
The scene setting will be retained even if the camera is turned off.
Macro photography is not possible in the Scene mode.
To Next Page
Loading...
