E
49
Magnifying Images
While reviewing your images, you may enlarge a selected section. This magnification allows you to view fine
details.
1. Power on your camera.
2. Press the [ ] playback button.
The last recorded image appears on the LCD monitor.
3. Use the / buttons to select the frame you want to enlarge.
4. Adjust the zoom ratio by using the [ T ] telephoto button or [ W ] wide-angle
button.
Pressing the [ T ] telephoto button will enlarge the image.
To return to normal magnification, press the [ W ] wide-angle button.
The image is displayed enlarged. You will see a green frame with a green
box inside. The green frame indicates the entire image, while the green
box shows the location of the currently enlarged area.
5. Use the / / / buttons to select the area to enlarge.
6. To return to the regular display from 6X-enlarged status, press the button.
If you keep pressing the [ W ] wide-angle button, it will change into thumbnail images.
Pressing the [ T ] button magnifies the image from 1.3X 2.0X 2.2X 2.4X 2.6X 2.8 3.0X 3.2X
3.4X 3.6X 3.8X 4X 6X.
To Next Page
Loading...
Need help?
General
