Print Controller User’s Guide Appendix B-3
Appendix B Product Specifications
Interface: Parallel port Centronics (IEEE 1284)
amphenol 25 pin male connector
Network Interface (Option):
Ethernet Card 75
: Ethernet (100BaseTX / 10BaseT)
Protocol: IPX/SPX (NetWare)
TCP/IP (LPD/LPR, Peer to Peer)
AppleTalk (EtherTalk)
Printer Language: PCL5e
Adobe PS3 (optional PS3 kit required)
Built-in fonts: Agfa Microtype fonts
Compliant OS: Windows 95/98/Me
Windows NT 4.0/2000
Mac OS 7.1 or more (optional PS3 kit required)
Printer Driver: Printer driver for Windows 95/98/Me/NT 4.0/2000
PS printer driver for Windows (optional PS3 kit required)
PS printer driver for Macintosh (optional PS3 kit required)
Compliant Host Computer: A Windows-based computer
Macintosh (optional PS3 kit required)
Option: memory: Memory Upgrade 64 (DIMM 64 MB)
Dimension: 200 mm(W) x 415 mm(D) x 350 mm(H)
7.9” (W) x 17” (D) x 13.8” (H)
Weight: Approx. 11 kg
Approx. 242.5 lb
Power: AC 100-120/200-240 V 50/60Hz
(Suplied from the main body)
Working Environment: Temperature: 10 degree °C to 30 degree °C
50 degree °F to 86 degree °F
Humidity: 10 % to 80 %RH (non-condensing)
Restrictive Conditions
• Although the Weekly Timer function of the main body printer is available in the Printer
mode, the power is not turned Off until the data output is finished when print data remains
in the E-RDH.
*1 Numbers in the case of continuous printing following the storage of all pages in E-RDH
memory, or numbers in the case of printing the same image on multiple papers.
Notice: Specifications are subject to change without notice.
To Next Page
Loading...