Oce 75 - PCL Setup

Print Controller User’s Guide 4-15
Chapter 4 Control Panel Setup
● PCL Setup
It is not necessary to turn OFF/ON the main body printer.
Select [PCL Setup] from the Printer Mode Basic Screen to display the PCL Setup Screen.
Setting items are as follows:
[Courier Style]
Select [Courier Style] to set the Courier Style.
Setting items are as follows:
• Dark : use old version Courier Style
• Light : use new version Courier Style (Default)
[CR/LF Mapping]
Select [CR/LF Mapping] to set the CR/LF Mapping.
Setting items are as follows:
• CR/LF : replace line ending LF code to CR/LF
• CR : does not convert line ending code (Default)
[Input Tray]
Select [Input Tray] to set the Input Tray.
Setting items are as follows:
• Auto Tray (Default)
• Tray 1
• Tray 2
• Tray 3
• Tray 4
• Bypass Tray
● Controller Time
Select [Controller Time] from the Printer Mode Basic Screen to display the Time Change
Screen. You can change the Printer’s current time setting.