Oce 75 - Set Default

4-14 Print Controller User’s Guide
Chapter 4 Control Panel Setup
● Set Default
It is not necessary to turn OFF/ON the main body printer.
Select [Set Default] on the Printer Mode Basic Screen to display the Set Default Screen.
Setting items are as follows:
[Default Paper]
Select [Default Paper] to set the default paper size.
Setting items are as follows:
A3R / A4 / B4R / B5 / 11 x 17R / 8.5 x 14R / 8.5 x 11 (Default)
[Resolution]
Select [Resolution] to set the default Resolution.
Setting items are as follows:
• 400 x 400 dpi : set the Resolution to 400 dpi (Default)
• 600 x 600 dpi : set the Resolution to 600 dpi
[Print Quality]
Select [Print Quality] to set the default Print Quality. Only [1 bit] is available.
[Duplex]
Select [Duplex] to set the default Duplex.
Setting Items are as follows:
• Off : set the Duplex off (Default)
• Long Edge : set the Long Edge Duplex
• Short Edge : set the Short Edge Duplex
[Orientation]
Select [Orientation] to set the default Orientation.
Setting items are as follows:
• Portrait : set the Orientation to Portrait (Default)
• Landscape : set the Orientation to Landscape