4-12 Print Controller User’s Guide
Chapter 4 Control Panel Setup
● Controller Set
To enable the settings, it is necessary to turn OFF/ON the main body printer.
Select [Controller Set] on the Printer Mode Basic Screen to display the Controller Set
Screen.
Setting items are as follows:
[Banner Page]
Select [Banner Page] to set the Banner Page.
Setting items are as follows:
• On : prints the Banner Page prior to the set of print job
• Off : (Default)
[Banner Page Tray]
Select [Banner Page Tray] to set the tray for Banner Page.
Setting items are as follows:
Auto Tray / Tray1 / Tray2 / Tray3 / Tray4 / Bypass Tray
[Spool]
Select [Spool] to set the Spool condition.
Setting items are as follows:
• On : spool waiting print job queue within HDD
• Off : interpreter within the print controller processes the print job without spooling
(Default)
[Job Time Out]
Select [Job Time Out] to set the Job Timeout value. When it reaches the job time out
value without receiving any print job data or without any communication between the
printing system and your computer, the printing system deems it to be the end of the
print job.
Setting values are as follows:
• 5 / 10 / 15 / 20 / 30 (Default) / 60 / 120 / 180 / 240 / 300 (unit: seconds)
To Next Page
Loading...