Oce 75 - Product Specifications

Appendix B-2 Print Controller User’s Guide
Appendix B Product Specifications
■ Product Specifications
Type: Built-in box type for the Océ 3275/750 Copier-Printer
Paper: • The paper sizes specifiable in the printer driver:
5.5X8.5 / 8.5x11 / 8.5x14 / 11x17 / A3 / A4 / A5 / A6 / B4 / B5
/ B6 / F4 / 8K / 16K / 5.5X8.5W / 8.5x11W / 11x17W / A3W /
A4W / A5W / B4W / B5W
• The paper sizes selected automatically according to the
job settings:
5.5X8.5R / 8.5x11R / A4R / A5R / A6R / B5R / B6R / F4R /
5.5X8.5WR / 8.5x11WR / A4WR / A5WR / B5WR
Paper Feeding and
Amount of Feeding Paper: The same as the copier
Load Output Paper: The same as the copier
Mode: The dual operation of the Copier and the Printer is available.
(5 jobs, including scanning jobs, can be processed at the
maximum.)
Special Printing: Offset, Staple function, Combination, Punch Function, Fold
and Stitch function, Wait Mode function, Image Shift function,
Password Printing, Chapter, Image Storage, Form Overlay
function, Front/Back Cover function, etc.
Orientation: Portrait and Landscape.
Resolution: Printing System: 400 dpi / 600 dpi
Scanning System: 200 dpi / 300 dpi / 400 dpi / 600 dpi
Gradation: 1 bit
No. of Print: 1 to 9999
Continuous print speed: 400 x 400 dpi / 600 x 600 dpi : 75 ppm *1 (A4, 8.5 x 11)
Printable Area: Standard: Head and Foot Margins: 2.5 mm
Right and Left Margins: 2.5 mm
Wide: 0 mm
Warm-up time: the same as the copier
Basic Configuration
Control Board
CPU: Celeron 800 MHz
System Memory: 64 MB SD-RAM (Standard),
Expandable up to 512 MB (Option: Memory Upgrade 64)